Перейти к информации о продукте
1 из 7

OAS Outdoors

Geoid Bike Headlight Rotate Lens Cycling Led Lamp USB Rechargeable Cycle Front Light Bicycle Powerful BankFlashlight TypeC 800LM

Geoid Bike Headlight Rotate Lens Cycling Led Lamp USB Rechargeable Cycle Front Light Bicycle Powerful BankFlashlight TypeC 800LM

Обычная цена $65.00 USD
Обычная цена Цена со скидкой $65.00 USD
Распродажа Продано
Стоимость доставки рассчитывается при оформлении заказа.
Color

Origin: Mainland China

Certification: CE

Model Number: BL610

Mounting Placement: Handlebar

Power Supply: Battery

REVERSE HANGING CYCLING HEADLIGHT

HOW TO RECHARGE

Enter:
Open the USB waterproof plug at the bottom of the lamp, insert the charging cable into the USB Type-C port, and connect the other end to the charging device please use a 5V-2A charging device for charging.

Charging: Green light fashes
Fully charged: Steady green light

Output:
Open the USB waterproof plug at the bottom of the lamp, insert the charging cable into the USB Tyoe-C oort. and connect the other end to the device that needs to be charged, such as tai lights, mobile phones,tabiet computerscameras, etc.The output is 5V-2A

REVERSE HANGING INSTALL

①.Follow the unlock arrow indicator to turn the lens and then remove the lens.
② .Flip the lamp , the lens low beam icon is 45 degrees upward to enter the light. Turn the lens as the direction of the lock arrow,and reverse the orientation of the lens then hang the light on the handlebar and finish the installation.

Note: Correct use of anti-glare function:Please keep the low beam icon of the lens directly above the lamp.
lt is forbidden to use the lamps after removing the lens.The lamps has no waterproof function after removing the lens.
Please keep the lens and lamp bead surface clean, otherwise the service life will be affected.

LOCK MODE

To prevent potential damage from high heat or even fire,it is very important to put the bicycle light in lock mode and protect the switch brom being pressed.We will not be held responsible for damages to person or property resulting from a failure to follow the lock mode instructions.

Note: For the first time, please unlock the lock mode first.

Lock:
When power off, quickly press the power button 5 times until the power indicator flashes red.

Unlock:
When device lock,quickly press the power button 5 times continuously until the green power indicator light is on.

Power-On State: Flash on Power Button automatically every 3 seconds.
Power-Off State: Flash on Power Button after single click.

HOW TO INSTALL

①Unfold the strap of the bracket and tie it to the handlebar.
② Install the nut and tighten.
③ Put the base of the light into the holder, then rotate it 90°.
④Adjust the light irradiation angle so that the light will not shine on the opposite drivers and pedestrians, tighten the nut, and the installation is complete.

PRECAUTIONS

.Do not let the light head against your eyes when turn on it.
.Do not touch the matal head when using the highlight gear for a long time. Do not use for children without adult supervision.
.Please charge at an amblient temperature of 5C to 40°.
Please check if the charging cable is in good condition before charging..When charging. please use a 5V-2AUSB power adapter..After charging, be sure to unpiug the charging connector.
Do not charge, discharge and store in a high temperature environment, otherwise accelerate the aging of the battery
.Do not place lights in the car or near heat sources
.After charging correctly, if the usage time of the battery is getting shorter and short means that the rechargeable battery has reached its effective service life. Please re the battery at the local repair point and comply with local regulations, and properly dispose of the waste rechargeable battery.
.When this product is not in use, it needs to be charged every 3 months to avoid damage to the battery and make it unusable.
Please store the lights in a cool and dry place after fully charging


В наличии: 687

Просмотреть всю информацию